/ hardware sensor

Cerebrum

Inline ARM-based hardware sensor built on the SolidWAN LX2160A platform. All ports directly connected to the CPU for maximum software-defined networking performance. Available in single and dual processor configurations.

Request Hardware Documentation

SASE

Secure Access Service Edge

BNG

Broadband Network Gateway

SD-WAN

WAN Edge Gateway

IDS/IPS

Inline Security Appliance

Inline eBPF/XDP Processing

Wire-speed packet filtering using eBPF/XDP in native mode. All ports are directly connected to the CPU for maximum software-defined networking efficiency — no switching ASIC in the path.

eBPF/XDP native modeSub-microsecond latencyAll ports CPU-directZero-copy packet processingDPDK & VPP compatible

Dual NXP LX2160A Processors

Two NXP LX2160A SoCs, each with 16x ARM Cortex-A72 cores at up to 2.0 GHz. Hardware AES acceleration and full virtualization support for flexible workload isolation.

2x 16-core ARM Cortex-A72 @ 2.0 GHzHardware AES accelerationVirtualization supportUp to 32GB DDR4 per processor

30-Port High-Density Connectivity

Purpose-built port layout for enterprise edge and data center deployments. Mix of 1G, 10G, and 100G interfaces — all directly connected to the CPU, no shared bus.

12x SFP 1 GbE (dedicated)12x SFP+ 10 GbE (dedicated)4x SFP+ 10G via Intel OCP3 NIC2x QSFP28 100G via Mellanox OCP3 NIC

Storage & Expansion

Dual 8GB eMMC on-board storage with MicroSD and M.2/mSATA expansion slots. OCP 3.0 NIC slots for flexible network adapter upgrades.

Dual 8GB eMMCMicroSD slotM.2 / mSATA expansionOCP 3.0 NIC support

JA4+ Network Fingerprinting

Identify applications and threats by their network behavior, even through encryption. Full JA4+ suite — TCP, TLS, HTTP, SSH, DHCP fingerprints at wire speed.

JA4/JA4S TLS fingerprintingJA4T TCP fingerprintingJA4H HTTP fingerprintingEncrypted traffic classification

Security Stack

Run IDS/IPS signatures alongside eBPF-based detection. Threat intelligence feeds, geo-IP filtering, and automated response — all inline.

IDS/IPS rule engineThreat intelligence integrationGeo-IP filteringAutomated blocking & response

SASE & SD-WAN Ready

Built for Secure Access Service Edge, Broadband Network Gateway, and WAN edge deployments. Full Linux software stack with DPDK and VPP support.

SASE deploymentsBNG / SD-WAN gatewayDPDK reference supportVPP reference support

Fleet Management

Deploy sensors at every network edge. Monitor throughput, power, temperature, and threat stats across your entire fleet from a single dashboard.

Centralized managementHealth monitoring & alertingRemote firmware updatesAutomatic policy sync

/ specifications

Hardware Configurations

Two configurations available. Both share the same 1U rackmount form factor, dual hot-swap PSU, and full software stack compatibility.

Dual LX2160A (Enterprise Edge)

Processor2x NXP LX2160A (16x ARM Cortex-A72 @ 2.0 GHz each)

Cores32 total (16 per SoC)

MemoryUp to 32GB DDR4 per processor (64GB total)

AES AccelerationYes (hardware)

VirtualizationYes

StorageDual 8GB eMMC, MicroSD, M.2/mSATA

1 GbE Ports12x SFP (dedicated, CPU-direct)

10 GbE Ports12x SFP+ (dedicated) + 4x SFP+ (Intel OCP3 NIC)

100 GbE Ports2x QSFP28 (Mellanox OCP3 NIC)

Total Ports30

ExpansionOCP 3.0 NIC slots

Form Factor1U rackmount

PSUDual hot-swap

CoolingDual fans

Power120W max / 70W average

SoftwareLinux, eBPF/XDP, DPDK, VPP, IDS/IPS, JA4+

Single LX2160A

Processor1x NXP LX2160A (16x ARM Cortex-A72 @ 2.0 GHz)

Cores16

MemoryUp to 32GB DDR4

AES AccelerationYes (hardware)

VirtualizationYes

Storage8GB eMMC, MicroSD, M.2/mSATA

1 GbE Ports8x SFP (dedicated, CPU-direct)

10 GbE Ports8x SFP+ (dedicated) + 4x SFP+ (Intel OCP3 NIC)

100 GbE PortsN/A

Total Ports20

ExpansionOCP 3.0 NIC slot

Form Factor1U rackmount

PSUDual hot-swap

CoolingDual fans

Power120W max / 70W average

SoftwareLinux, eBPF/XDP, DPDK, VPP, IDS/IPS, JA4+

Need help choosing the right configuration?